vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Engine Coolant Thermostat Housing Installation > < Water Pump Pulley Removal

Cylinder Head Removal


           2027932



1. Remove the 10 cylinder head bolts in sequence as shown.
  1.1 Loosen the 10 bolts 90° .
  1.2 Loosen the 10 bolts 180° .
2. Remove the cylinder head and place on a suitable base.
3. Remove the cylinder head gasket.

Engine Coolant Thermostat Housing Installation > < Water Pump Pulley Removal