Turbocharger Air Inlet Adapter Removal
| 1. |
Loosen the clamp (3) and
remove the charge air bypass valve pipe (1) from the charge air
bypass valve (2). |
| 2. |
Loosen the clamp and remove
the turbocharger wastegate actuator hose (2) from the turbocharger
wastegate actuator (3). |
| 3. |
Loosen the clamp and remove
the turbocharger wastegate regulator solenoid valve hose (5) from
the turbocharger (4). |
| 4. |
Remove the 2 turbocharger air
inlet bolts (6). |
| 5. |
Remove the turbocharger air
inlet adapter (1). |
| 6. |
Remove and discard the
gasket. |
|
