Astra J
Valve Lifter Replacement (1.6L LDE, LXV, LLU and 1.8L 2H0, LFH)Special ToolsEN-845 Suction DeviceFor equivalent regional tools, refer to Special Tools . Removal Procedure
|
1. | Remove the camshafts. Refer to Camshaft Replacement . |
Note: Mark the assignments. |
2. | Remove the 16 tappets (1), using the EN-845 suction device . |
Installation Procedure
Note: Observe the correct assignment. |
Note: Coat the sliding surfaces with NEW engine oil. |
1. | Install the 16 tappets (1), using the EN-845 suction device . |
2. | Install the camshafts. Refer to Camshaft Replacement . |