Piston, Connecting Rod, and Bearing Removal
| 1. |
Mind the fracture face (1) of
connecting rod bearing cap and connecting rod. The connecting rod
bearing caps must not be interchanged with other connecting
rods. |
|
Note: Rotate the
crankshaft to a position where the connecting rod bearing nuts are
most accessible.
|
| 2. |
Remove the 8 connecting rod
bearing cap nuts (3). |
| 3. |
Remove the connecting rod
bearing caps (2). |
| 4. |
Remove the lower connecting
rod bearings (1). |
| 5. |
Remove the 4 pistons (1) in
compound with the 4 connecting rods (2) from the cylinder
block. |
|
