Camshaft Cover Cleaning and Inspection
Cleaning Procedure
1. |
Clean the camshaft covers in
solvent. |
2. |
Dry the camshaft covers with
compressed air. |
Inspection Procedure
1. |
Inspect each camshaft cover
for the dents or damage to the exterior. A dented or damaged
camshaft cover may: |
|
• |
Affect crankcase
ventilation |
|
• |
Interfere with the
camshafts |
|
• |
Interfere with the ignition
coil sealing |
|
• |
Allow water or condensation to
enter the engine |
2. |
Inspect the exterior of the
camshaft cover (2) for the following conditions: |
|
• |
Damage to the camshaft cover
bolt holes (1 and 4) |
|
• |
Damage to the engine sight
shield bolt holes (3) |
3. |
Inspect the interior of the
camshaft cover for the following conditions: |
|
• |
Inspect the camshaft cover for
cracks, casting imperfections or damage (1 and 5) |
|
• |
Inspect the camshaft cover
sealing (2) and the fuel injector sealings (3) for cracks or
damage |
|
• |
Inspect the camshaft cover
bolts (4) for flawless thread |
|