Crankshaft Pulley Removal
Special Tools
• |
CH-161-B
Bearing Puller |
For equivalent regional tools refer to
Special Tools .
1. |
Install EN-662-C
bracket in order to fix the crankshaft pulley. |
2. |
Loosen the crankshaft pulley
bolt while holding up the crankshaft pulley. |
3. |
Remove the EN-662-C
bracket . |
4. |
Remove the crankshaft pulley
bolt and the crankshaft pulley washer. |
5. |
Install CH-161-B
bearing puller (2) and detach the crankshaft pulley
(1). |
6. |
Remove the crankshaft pulley
(2) and the crankshaft pulley flange (1). |
|