Intake Manifold Assemble (1.7L Diesel LPL, LPV and LUB)
1. |
Install the bracket
(5). |
2. |
Install the bracket bolt (6)
and tighten to 10 N·m (89 lb in) .
|
3. |
Install the vacuum regulator
(8). |
4. |
Install the 2 vacuum regulator
bolts (7) and tighten. |
5. |
Install the turbocharger
pressure sensor (3). Use a NEW seal ring (4). |
6. |
Install the 2 turbocharger
pressure sensor bolts (2) and tighten to 10 N·m (89
lb in) . |
7. |
Install the intake manifold
bracket (2). |
8. |
Install the 2 intake manifold
bracket bolts (1) and tighten to 20 N·m (15 lb
ft) . |
9. |
Install the throttle body (3).
Use a NEW gasket. |
10. |
Install the 4 throttle body
bolts (4) and tighten to 9 N·m (80 lb in)
. |
|