Camshaft Timing Pulley Replacement
Special Tools
For equivalent regional tools, refer to
Special Tools .
Removal Procedure
3. |
Install EN-6347
holding tool (3) and EN-956-1 extension (2)
in order to fix the camshaft. |
4. |
Loosen the camshaft pulley
bolt (1) while holding up the camshaft pulley. |
5. |
Remove the camshaft pulley
bolt (3) and the washer (2). |
6. |
Remove the camshaft pulley
(1). |
Installation Procedure
1. |
Install the camshaft pulley
(1). |
2. |
Install the camshaft pulley
bolt (3) and the washer (2). |
3. |
Align the notch (2) exactly
over the locating stud (1). |
|
Install EN-6347 holding tool (3) and
EN-956-1 extension (2) in order to fix the camshaft
pulley. |
4. |
Tighten the camshaft pulley
bolt (1) to 111 N·m (82 lb ft) while
holding up the camshaft pulley. |
|