Automatic Transmission Flex Plate Installation
Special Tools
EN-46792 Flywheel Holder
For equivalent regional tools, refer to
Special Tools .
|
Note: The automatic
transmission flexplate only fits in one position.
|
1. |
Install the automatic
transmission flexplate (2) and loosely install the 6 NEW automatic
transmission flexplate bolts (1). |
2. |
Install the EN-46792
holder (2) to the automatic transmission flexplate (1) in
order to lock the crankshaft. |
3. |
Tighten the automatic
transmission flexplate bolts to 160 N·m (118 lb
ft) . |
|