Clutch Actuator Cylinder Installation
Special Tools
DT-6157 Assembly Sleeve
For equivalent regional tools, refer to
Special Tools
1. |
Clean the clutch actuator
cylinder threads. |
2. |
Install a NEW clutch actuator
cylinder seal (3). |
3. |
Install DT-6157
assembly sleeve (2) during the installation procedure to
avoid damage of the seal ring (arrow) and remove after the
procedure. |
4. |
Install the clutch actuator
cylinder (1). |
5. |
Install the 3 clutch actuator
cylinder bolts (1) and tighten to 5 N·m (44 lb
in) . |
|