vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Table 2 - Trouble Code Table: Trouble Code 39 FL WHEEL SENSOR BAD SIGNAL > < Table 2 - Trouble Code Table: Trouble Code 25 DEFECTIVE TOOTH ON WHEEL SENSOR

Table 2 - Trouble Code Table

 

Trouble Code

Information Sensor Cause of Fault

Remedy in FO:DATA LIST No.

Trouble Code Storage when ....

Remarks

37

BRAKE SWITCH CIRCUIT

04

·   The fault is recognized if, with the ignition switched on (after completion of the switch-on test), a lead interruption is present for longer than 700 ms.

     (The signal voltage at the processor is cyclic analogue. If the signal is correct, only voltage levels in the range < 2 V and > 4 V occur. Voltages measured in the intermediate range are evaluated as a lead fracture).

 

On fault recognition, the ABS is switched off and the ABS telltale is switched on.

 

 

 

 


Related Literature Units
-F0: Data List - Test Step 04 BRAKE SWITCH

Table 2 - Trouble Code Table: Trouble Code 39 FL WHEEL SENSOR BAD SIGNAL > < Table 2 - Trouble Code Table: Trouble Code 25 DEFECTIVE TOOTH ON WHEEL SENSOR