vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Wiring Harness Plug in Control Unit K 50 for KADETT-E/ASTRA-E/BELMONT > < Table 3 - Control Unit

Astra

Terminal Assignment in 35-pin Wiring Harness Plug for Control Unit K 50 (KADETT-E/ASTRA-E/BELMONT/CALIBRA, Model Year'90)

 

1        Voltage supply Ter. 15

2        Solenoid valve, front left

3        Unoccupied

4        Ground, wheel speed sensor, front left

5        Signal lead, wheel speed sensor, front left

6        Unoccupied

7        Unoccupied

8        Signal lead, wheel speed sensor, rear left

9        Ground, wheel speed sensor, rear left

10      Ground, control unit K 50

11      Signal lead, wheel speed sensor, front right

12      Unoccupied

13      Unoccupied

14      Voltage recognition, pump relay U 4.1

15      Unoccupied

16      Unoccupied

17      Voltage supply U 4.1 and U 4.2

18      Solenoid valve, rear

19      Unoccupied

20      Ground, control unit K 50

21      Ground, wheel speed sensor, front right

22      Unoccupied

23      Unoccupied

24      Signal lead, wheel speed sensor, rear right

25      Brake lamp switch

26      Ground, wheel speed sensor, rear right

27      Valve relay U 4.2

28      Pump relay U 4.1

29      Actuation, ABS telltale

30      Diagnostic excitation lead, ABS-2E

31      Bidirectional data lead

32      Voltage recognition, valve relay

33      Unoccupied

34      Ground, control unit K 50

35      Solenoid valve, front right

 

 

Note:                  Assignment in the control unit plugs for the KADETT-E/ASTRA-E/BELMONT and CALIBRA are identical. The only difference is the shape of the control unit plug.

 

Wiring Harness Plug in Control Unit K 50 for KADETT-E/ASTRA-E/BELMONT > < Table 3 - Control Unit