|
Ter. 30 Voltage supply
from starter/Ter. 30
Ter. 30A Voltage supply for
control unit K 50, pump relay U 4.1 and valve relay U 4.2 on hydraulic
modulator
Ter. 31 Ground
Ter. 86 Voltage supply
via fuse F 13 for KADETT-E/ ASTRA-E/BELMONT and F 14 for CALIBRA
Note:
Surge arrestor relay K 47 is
located in the left spring strut dome (in the direction of travel) in the
KADETT-E/ASTRA-E/BELMONT.
In the CALIBRA, surge arrestor
relay K 47 is connected to a red base in the relay box, on the left as seen
in the direction of travel.
|
