- Corsa B Workshop Manual
- General Vehicle Information
- A Maintenance, Body and Chassis Sheet Metal Parts, Frame
- B Paint
- C Body Equipment
- D Heating, Ventilation, Air Conditioning (HVAC)
- E Front Wheel Suspension, Wheels and Tyres
- F Rear Axle and Rear Wheel Suspension
- H Brakes
- J Engine and Engine Aggregates
- Repair Instructions
- Specifications
- Labour Time Allowances
- Diagnostic Information and Procedures
- Other Information
- Technical Service Bulletins
- Technical Information
- OHC Petrol Engine
- DOHC Petrol Engine
- Description and Operation
- Diagnostic Information and Procedures
- Technical Service Bulletins
- General
- Repair Instructions
- Partial Engine Compartment Cover, Remove and Install - as of MY '96 (Vehicles with Power Steering and AC) air conditioning
- Oil Temperature, Measure
- Cooling System, Check for Leaks
- Coolant Temperature, Measure with Cooling System Closed
- Radiator, Remove and Install (Vehicles without Power Steering and AC) air conditioning)
- Temp. Switch for Fan Motor, Remove and Install (Vehicles without Power Steering and AC)
- Temp. Switch I(S-29) for Fan Motor, Remove and Install (Vehicles with AC) with air conditioning)
- Temp. Switch II(S-29) for Fan Motor, Remove and Install (Vehicles with AC) with air conditioning)
- Fuel Pump Relay, Remove and Install reinstallation
- Immobiliser with Transponder as of MY '96 Immobiliser Control Unit, Remove and Install
- Secondary Air Cleaner, Remove and Install
- Secondary Air Pump, Remove and Install reinstallation
- Secondary Air Pump Bracket, Remove and Install
- Electric Switchover Valve, Remove and Install
- Checking and Adjusting Operations - Compression, Check
- Engine Pressure Loss, Check
- Oil Consumption, Measure
- Timing, Check
- Timing, Adjust
- Toothed Belt Tension, Check
- Toothed Belt Tension, Adjust
- Engine with Transmission, Remove and Install
- Engine, Repair Using Short-block
- Cylinder Head Gasket, Check for Leaks (CO2 Content in Cooling System)
- Cooling System, Top Up and Bleed
- Fan Motor, Remove and Install (Vehicles without AC)
- Fan Motor, Remove and Install (Vehicles with AC)
- Radiator, Remove and Install (Vehicles with Power Steering and AC) conditioning)
- Important Workshop Instructions
- Fuel Pressure, Check
- Illustration - Secondary Air System (X14XE, X16XE)
- Combination Valve, Remove and Install reinstallation
- Secondary Air Metal Pipe, Remove and Install
- Illustration: Air Ducts (X 14 XE, C 14 SEL, X 16 XE, C 16 SEL)
- DOHC Petrol Engine - Engine Identification/Engine Number
- Component Locator
- Specifications
- Special Tools and Equipment
- Other Information
- Seals and Seal Rings
- Ribbed V-Belt
- Fuel Pump
- Engine Damping Block
- Oil Circulating
- Timing Gear Case
- Cylinder Block
- Cylinder Head
- Diesel Engine
- Fuel Injection Systems
- Engine Electrics
- Cooling System
- Turbo-Charging
- K Clutch and Transmission
- L Fuel and Exhaust System
- M Steering
- N Electrical Equipment and Instruments
- R Accessories