Place front valve body (1) with new gaskets (2, 4) and plate (3) on rear valve body (5). Insert 5 bolts for attaching rear valve body to front valve body - do not tighten yet. 4 long bolts (6) / 1 short bolt (7). Insert 5 bolts for attaching front valve body to rear valve body. 4 short bolts (8), 1 long bolt (9) - inserting fastening clip and fluid carrier plate (arrows).
Tighten (Torque) Tighten all bolts (total of 10) on valve body - 7 Nm / 5 lbf. ft. Insert 3 lock balls (11), fluid strainers (12) and pressure limiter valve with spring (10). |