Remove and install engine control unit (Z 10 XE, Z
10 XEP, without air conditioning, LHD)
Note: If the engine
control unit is replaced or exchanged, the safety code must be
reset using TECH 2 before removing
Remove
2. |
Disconnect battery
Note: In vehicles as of
model year 04 with ESP - every time the battery is disconnected,
the steering angle sensor loses its basic setting and must be
recalibrated
|
3. |
Disconnect 2x engine control unit wiring harness plugs
• |
Release in direction of arrow (arrows)
|
|
|
|
5. |
Remove engine control unit
|
Install
6. |
Install engine control unit
|
8. |
Connect 2x engine control unit wiring harness plugs
|
10. |
Program volatile memory
|
|