vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Checking and adjusting values - 20 SE, X 20 SE > < DIS Ignition Module, Remove and Install

Omega B

Fuel Pressure, Check

Caution

Fuel escapes. Observe safety regulations and national legislation.

  Install

Attach Fuel Pressure Gauge KM-J-34730-91 to test connection (1). Start engine and bleed fuel pressure gauge – idle speed. Collect escaping fuel in a suitable container.

  Inspect

Fuel Pressure, Check

Vacuum hose for fuel pressure regulator

connected: see Checking Procedures Motronic M 1.5.4.

disconnected 1) : see Checking Procedure Motronic M 1.5.4.

  Remove

Remove Fuel Pressure Gauge KM-J-34730-91 from test connection.

 Object Number: 2387584 Size: DEFAULT

1 ) Seal off vacuum hose.
Related Literature Units
-
-

Checking and adjusting values - 20 SE, X 20 SE > < DIS Ignition Module, Remove and Install