vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Inductive Impulse Sensor > < TABLE 2, TROUBLE CODES - Trouble Code 94 HALL SENSOR VOLTAGE HIGH

 

 

Terminal Assignment of Control Unit Plug

 

Ter. 1          Ignition signal to ignition coil L 2 / Ter. 1

Ter. 2          Ground, ignition final stages

Ter. 3          Ground pulse, fuel pump relay K 44 / Ter. 86

Ter. 4          Ground pulse, idle speed adjuster M 33

Ter. 5          Ground pulse, controlled canister purge valve Y 34

Ter. 6          Ground pulse, intake manifold valve 1 Y 46

Ter. 7          Signal lead, hot film mass air flow meter

Ter. 8          Signal lead, cylinder recognition Hall sensor P 47 / Ter. 2

Ter. 9          Signal lead, rear left wheel speed sensor

Ter. 10        Separate ground for oxygen sensor 1 / 2 P 32 / P 36

Ter. 11        Signal lead, knock sensor 1 P 46

Ter. 12        Voltage supply, from throttle valve potentiometer P 34

Ter. 13        Diagnostic excitation lead Ter. 6 in diagnostic plug XD

Ter. 14        Ground for injector final stages

Ter. 15        Ground pulse for injector cylinder 5

Ter. 16        Ground pulse for injector cylinder 2

Ter. 17        Ground pulse for injector cylinder 1

Ter. 18        Voltage supply of fault memory (permanent positive Ter. 30)

Ter. 19        Ground, electronics

Ter. 20        Ignition signal to ignition coil L 2 / Ter. 2

Ter. 21        Ignition signal to ignition coil L 2 / Ter. 3

Ter. 22        Ground pulse for engine telltale H 30

Ter. 23        Ground pulse for exhaust gas recirculation valve Y 18

Ter. 24        Ground, final stages, tank vent valve, engine telltale, idle speed adjuster, fuel pump relay

Ter. 25        Ground pulse, AC relay K 60 / Ter. 6

Ter. 26        Ground pulse, secondary air pump relay K 12 / Ter. 26

Ter. 27        Voltage supply, control unit Ter. 15

Ter. 28        Signal lead, oxygen sensor 1 P 32

Ter. 29        Signal lead, knock sensor 2 P 46

Ter. 30        Ground, air temperature sensor, engine temperature sensor, throttle valve potentiometer, hot film mass air flow meter, knock sensor, exhaust gas recirculation response potentiometer

Ter. 31        Unoccupied

Ter. 32        Unoccupied

Ter. 33        Ground pulse for injector cylinder 6

Ter. 34        Ground pulse for injector cylinder 4

Ter. 35        Ground pulse for injector cylinder 3

Ter. 36        Unoccupied

Ter. 37        Voltage supply of control unit from injector relay K 43 / Ter. 87

Ter. 38        Input signal, Traction Control (TC) injection signal deactivation

Ter. 39        Unoccupied

Ter. 40        Input signal, AC compressor

Ter. 41        Input switch, AC standby

Ter. 42        Transmission coding, MT ground

Ter. 43        Signal lead, tachometer

Ter. 44        Signal lead, intake air sensor

Ter. 45        Signal lead, coolant sensor

Ter. 46        Ground pulse, injection system relay K 43 / Ter. 85

Ter. 47        Signal lead, oxygen sensor 2 P 36

Ter. 48        Inductive pulse pick - up (ground)

Ter. 49        Inductive pulse pick - up (signal)

Ter. 50        Signal lead, exhaust gas recirculation response potentiometer

Ter. 51        Load reduction ignition retard signal from transmission control unit

Ter. 52        Unoccupied

Ter. 53        Signal lead, throttle valve potentiometer P 34 / Ter. 3

Ter. 54        Output signal, throttle valve potentiometer for transmission control unit

Ter. 55        Bidirectional data lead in diagnostic plug X D / Ter. 7

 

 

Object Number: 2385625  Size: DEFAULT

 

 

Inductive Impulse Sensor > < TABLE 2, TROUBLE CODES - Trouble Code 94 HALL SENSOR VOLTAGE HIGH