|
· With
ignition "ON" and after starting the engine, the fault is
recognized after 160 ms
· Voltage
control relay can be actuated, i. e. trouble codes 62, 63 and 64 not set
· The
circuit routed to the relevant control unit outputs (terminal 48 and /
or 54) is open
· Engine
running
· The
fault must be recognized at least 8 times (160 ms).
· The
circuit routed to the relevant control unit outputs (terminal 48 and /
or 54) is open
Effects:
· Solenoid
valves (brake band, 1 - 2 / 3 - 4 shifting, 2 -
3 shifting, torque converter clutch) and electrohydraulic pressure
regulator are switched off
· If
the fault is recognized, the following gears can still be shifted manually in
each driving stage (emergency program):
"Driving stage"
(gear) "D"(4), "3"(4), "2"(3), "1"(1)
|
