· With
ignition "ON" the fault is recognized immediately
· Voltage
control relay actuated
· Engine
running
· Trouble
code 61 acknowledged.
· The
control unit sends pressure regulator current via the relevant lead. If the
current that arrives at the output of the lead is too high, the fault is
recognized after 0.5 s.
Effects:
· Solenoid
valves (brake band, 1 - 2 / 3 - 4 shifting, 2 -
3 shifting, torque converter clutch) and electrohydraulic pressure
regulator are switched off
· If
the fault is recognized, the following gears can still be shifted manually in
each driving stage (emergency program):
"Driving stage"
(gear) "D"(4), "3"(4), "2"(3), "1"(1)
|