Vauxhall Workshop Service and Repair Manuals

Remove centre console – see operation "Centre Console, Remove and Install" in group "C".

Remove rear air flow guide, if available

Detach fastening nuts (1) and remove front support (2). Remove fastening bolt (3) and remove rear support (4). Remove rear air duct.

Disconnect ground cable (arrow) from ground connection.

Disconnect wiring harness plug (3). Remove lock washers (1) from selector lever console. Press selector lever pawl contact switch (2) from selector lever housing.

  Install

Press selector lever pawl contact switch into selector lever housing – note installation position. Secure selector lever pawl contact switch with new lock washers.

Connect wiring harness plug. Connect ground cable to ground connection.

If available: Insert rear air flow guide and install front and rear support.