ABS Control Unit, Remove and Install (Vehicles with ABS-430)
ABS Control Unit, Remove and Install (Vehicles with ABS-430)
Remove, Disconnect
Remove hydraulic modulator with ABS control unit - see operation "Hydraulic Modulator with ABS Control Unit, Remove and Install (Vehicles with ABS 430)".
Remove fastening bolts (1). Carefully remove ABS control unit from hydraulic modulator - ensure that damage to coil body is avoided.
Remove gasket (2) between coil body and ABS control unit.
Clean
Remove gasket remnants, clean sealing surfaces.
Install, Connect
Insert new gasket in coil body.
Carefully position ABS control unit on hydraulic modulator.
Attach ABS control unit with new bolts to hydraulic modulator.
Install hydraulic modulator with ABS control unit - see operation "Hydraulic Modulator with ABS Control Unit, Remove and Install (Vehicles with ABS 430)".
Tighten (Torque)
ABS control unit to hydraulic modulator - 4.5 Nm / 3.5 lbf. ft.
Inspect
Bleed brake system - see operation "Brake System, Bleed and Check for Leaks".
Remove, Disconnect 
Clean 
Install, Connect 
Tighten (Torque) 
Inspect