Vauxhall Workshop Service and Repair Manuals

Hydraulic Line Seal Rings - Steering Gear, Replace  

  Remove, Disconnect   

Remove steering gear - see operation "Steering Gear, Remove and Install".   For Saginaw steering gear version: remove union nuts (1) and banjo bolts (2).   For Servotronic steering version: remove clips (3) and fastening bolt (4) with retaining plate.   Remove hydraulic lines.     Important!    Sealing operations must be performed with utmost care. Always replace seal rings. If hydraulic lines are damaged, replace them completely.

  Install, Connect   

For Saginaw steering version: insert hydraulic lines and connect to steering gear with union nuts and banjo bolts - tightening torque 37.5 ± 2 Nm / 28 ± 1.5 lbf. ft.  

For Servotronic steering version: Insert hydraulic lines and connect to steering gear with new clips and fastening bolt with retaining plate.  

Install steering gear - see operation "Steering Gear, Remove and Install".