B-08, Functional check of rear right electronic window winders, operation via rear right window winder switch S38.2 |
Test |
Work order description |
Nominal value |
T01 |
Functional check |
|
|
• Ignition “ON“ |
|
|
• Actuate rear right window switch S38.2 |
Function O.K. |
|
Yes: E01 |
No: T02 |
T02 |
Measure voltage |
|
|
• Ignition “ON“ |
|
|
• Disconnect body wiring harness plug & rear right door X18 |
|
|
• Rear right window switch S38.2 to “close“ |
|
|
• Measure voltage between wiring harness plug X18/terminal 5 (bushing) and ground |
each greater than 11.5 V |
|
Notice: If the nominal value has not been achieved, check whether there is a circuit interruption between X18/terminal 5 and S38/terminal 4, before proceeding to C-03 |
|
|
Yes: T03 |
No: C-03 |
T03 |
Measure voltage |
|
|
• Ignition “ON“ |
|
|
• Disconnect body wiring harness plug & rear right door X18 |
|
|
• Rear right window switch S38.2 to “open“ |
|
|
• Measure voltage between wiring harness plug X18/terminal 9 (bushing) and ground |
each greater than 11.5 V |
|
Notice: If the nominal value has not been achieved, check whether there is a circuit interruption between X18/terminal 9 and S38/terminal 3, before proceeding to C-03 |
|
|
Yes: C-04 |
No: C-03 |