Vauxhall Workshop Service and Repair Manuals

B-07, Functional check of front right electronic window winders
Test	Work order description		Nominal value
T01	Functional check
	•  Ignition “ON“		Function O.K.
	•  Actuate front right window switch S38.1
	Yes:   E01	No:   T02
T02	Measure voltage
	•  Ignition “ON“
	•  Disconnect body wiring harness plug & co-driver's door X16
	•  Front right window switch S38.1 to “close“
	•  Measure voltage between wiring harness plug X16/terminal 18 (bushing) and ground		greater than 11.5 V
	Notice:  If the nominal value has not been achieved, check whether there is a circuit interruption between X16/terminal 18 and S38/terminal 2, before proceeding to C-03
	Yes:   T02	No:   C-03
T03	Measure voltage
	•  Ignition “ON“
	•  Disconnect body wiring harness plug & co-driver's door X16
	•  Front right window switch S38.1 to “open“
	•  Measure voltage between wiring harness plug X16/terminal 17 (bushing) and ground		greater than 11.5 V
	Notice:  If the nominal value has not been achieved, check whether there is a circuit interruption between X16/terminal 17 and S38/terminal 1, before proceeding to C-03
	Yes:   C-06	No:   C-03

B-07, Functional check of front right electronic window winders
Result	Cause of fault
E01	•  No fault determinable

B-08, Functional check of rear right electronic window winders, operation via rear right window winder switch S38.2