Golf Mk6
Part II |
1 - | Knock sensor 1 -G61- |
q | To remove, the coolant thermostat housing must be removed → Chapter |
q | Gold-plated contacts. |
2 - | 20 Nm |
q | The specified torque influences the function of the knock sensor. |
3 - | Knock sensor 2 -G66- |
q | To remove, the oil filter bracket must be removed → Chapter |
q | Gold-plated contacts. |
4 - | Cable retainer |
5 - | Bolt |
6 - | Cable retainer |
7 - | Bolt |
8 - | Gasket |
q | Renew. |
9 - | Oil filter bracket with attachments |
q | Dismantling and assembling → Chapter. |
10 - | 15 Nm + 1/4 turn (90°) further |
q | Renew. |
11 - | Intake manifold support |
12 - | 23 Nm |
13 - | 10 Nm |
14 - | Engine speed sender -G28- |
15 - | Seal |
q | Renew. |
16 - | 15 Nm |
17 - | Coolant thermostat housing with thermostat |
q | Removing and installing → Chapter. |
18 - | O-ring |
q | Renew. |
19 - | 40 Nm |
q | Tightening sequence → Chapter. |
20 - | Bracket for ancillaries |
q | Removing and installing → Chapter. |