Golf Mk6
| Assembly overview - poly V-belt drive |
| 1 - | Bracket for ancillaries |
| q | Removing and installing → Chapter. |
| 2 - | 23 Nm |
| 3 - | 23 Nm |
| 4 - | Alternator |
| q | Removing and installing → Electrical system; Rep. gr.27 |
| q | To facilitate attachment of alternator, knock back threaded bushes for alternator securing bolts slightly. |
| 5 - | 40 Nm |
| q | Observe tightening sequence → Chapter. |
| 6 - | Bush |
| q | Qty. 2. |
| 7 - | 25 Nm |
| 8 - | Air conditioner compressor |
| q | Removing and installing → Air conditioning system; Rep. gr.87. |
| 9 - | Poly V-belt |
| q | Mark direction of rotation with chalk or felt pen before removing. |
| q | Check for wear. |
| q | Do not kink. |
| q | Removing and installing → Chapter. |
| 10 - | Belt pulley |
| q | For poly V-belt. |
| 11 - | 20 Nm + 90° (1/4 turn) further |
| q | Renew. |
| 12 - | 23 Nm |
| 13 - | Tensioning element for poly V-belt |
| q | Swing with open-end spanner to slacken poly V-belt. |
