Golf Mk6
| Assembly overview - air filter |
| 1 - | Air mass meter -G70- |
| q | Renewing seal and checking installation position is correct → Fig. |
| q | Removing and installing → Chapter. |
| 2 - | 3 Nm |
| 3 - | Upper part of air filter/engine cover |
| q | Remove salt residues, dirt and leaves from air filter lower section. |
| q | Removing and installing → Chapter. |
| 4 - | Spring-type clip |
| 5 - | Intake air duct |
| 6 - | Filter element |
| q | Always use genuine part for air filter element |
| q | Removing and installing → Chapter. |
| q | Observe change intervals → Booklet |
| 7 - | Air filter lower part |
| q | Remove salt residues, dirt and leaves from air filter lower section. |
| 8 - | 3 Nm |
| 9 - | Heat shield |
| 10 - | Rubber grommet |
| q | Observe assembly marking |
| 11 - | Intake hose |
| q | With connection to turbocharger air recirculation valve -N249- → Item |
| q | Observe assembly marking |
| q | Check for soiling and leaves in air hose. |
