Jetta L4-1.9L DSL Turbo (BEW) (2004)
Drive Belt: Service and Repair
Poly V-Belt, Removing and Installing
Poly V-belt, removing and installing
Caution: Observe safety notes.
Special tools, testers and auxiliary items required
-
Pin T10060
Removing
-
Remove right side sound insulation tray:
-
Mark direction of rotation of poly V-belt.
-
Turn tensioning device in direction of arrow to relieve tension on poly V-belt.
-
Lock tensioning element with retaining pin T1 0060
-
Remove poly V-belt.
Installing
-
Installation is performed in the reverse sequence of removal.
Note:
^
Before installing the poly V-belt, ensure that all ancillaries (Generator, air conditioning compressor, power steering pump) are secured tightly.
^
When installing the poly V-belt, check the direction of belt rotation and for proper seating of the belt in the pulleys.