Jetta Sedan L5-2.5L (BGP) (2005)
Installing
Install in reverse order of removal, noting the following.
‹› After installing, check motor/door function.
‹› Initiate "Basic Setting" function using Vehicle Diagnostic, Testing and Information System (VAS 5051/5052) in operating mode "Guided Fault
Finding" --> [ Climatronic Components, Checking and Adjusting ] See: Testing and Inspection/Component Tests and General
Diagnostics/Climatronic Components, Checking and Adjusting.
Fresh/Recirculating Air Door Motor
Fresh/Recirculating Air Door Motor
Removing
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
‹› Position of recirculating air door must not be changed.
-
Remove glove compartment.
-
Remove cover - 1 -.
-
Disconnect electrical connection from Fresh/Recirculating Air Door Motor (V154) - 2 -.
-
Remove Fresh/Recirculating Air Door Motor (V154) - 2 - from mounting.
Installing
Install in reverse order of removal, noting the following:
‹› Always check Fresh/Recirculating Air Door Motor (V154) and recirculating air door function after replacing motor.
-
Checking: Use Vehicle Diagnostic, Testing and Information System (VAS 5051/5052) in operating mode "Guided Fault Finding"
-
Replacing: Initiate Basic Setting using Vehicle Diagnostic, Testing and Information System (VAS 5051/5052) in operating mode "Guided Fault
Finding".