Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-755006.png)
Pressing out tapered roller bearing outer race
Pressing in tapered roller bearing outer race
-
Install with shim after adjusting input shaft.
Synchronizing 5th gear
1. Springs for locking pieces
2. Locking collar with 3 recesses - arrows A - for the locking pieces - 4 -
3. Synchronizer hub
4. Locking pieces - Installation position: The extension - arrow B - faces toward the pointed teeth of the locking collar - 2 -
Assembling 5th gear locking collar/synchronizer hub
