Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
-
Disengage the front harness connector - 1 - from the ECM and disconnect it.
-
Pry up the locking mechanism - 2 - slightly.
-
Push the ECM in the direction of - arrow - and out of the retaining plate.
-
Release the rear connector from the ECM and remove it.
Installing
-
Connect the rear connector to the ECM and lock it into place.
-
Slide the ECM on to retaining plate.
-
Now connect and secure the front connector - 1 - to the ECM.