Passat Sedan V6-3.6L (BLV) (2008)
Without Mechanical Vacuum Pump
-
Secure the position of the drive pinion for the high pressure pump using the adjustment tool T10332
With Mechanical Vacuum Pump
-
Secure the position of the drive pinion for the high pressure pump using the adjustment tool T10363. Marking - A - on high pressure drive camps
must be at top.
Continuation for All
First Install Camshaft Adjuster for Intake Camshaft as Follows
Note:
^
Both camshaft adjusters (identification: "24E" on intake side and "32A" on exhaust side) can only be bolted in one position on the camshaft
arrows - by an alignment pin.