Passat Sedan V6-3.6L (BLV) (2008)
Front Subframe Mount: Service and Repair
Subframe Bonded Rubber Bushings
Special tools, testers and auxiliary items required
‹› Installation device (3372)
‹› Thrust plate (VW 401)
‹› Punch (VW 407)
‹› Press piece (VW 432)
‹› Assembly tool (T10214)
‹› Assembly Tool (T10267) with adapter (T10267/1A)
‹› Tube from assembly tool (T10244/3)
Bonded Rubber Bushing, Pressing Out
-
Remove subframe. Refer to => [ Subframe without Steering Gear ] See: Cross-Member/Front Cross-Member/Service and Repair/Subframe
Without Steering Gear.
-
Install (T10267) - 4 - on subframe. Secure safety bolts using securing pins.
1. (VW 407)
2. Press piece (3372/1)
3. (VW 401)
4. (T10267)
5. (T10244/3)
-
Press out both bonded rubber bushings at the same time as depicted in the illustration.