volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Notes on installing > < Notes on removing

Polo Mk3

Securing engine to assembly stand
Securing engine to assembly stand
When working on the engine, secure it to support clamp -VW 313- of the assembly stand using engine and gearbox support -VW 540-.
Procedure
–  Remove gearbox.
   
–  Connect lifting tackle -2024 A- as shown.
Pulley end: 4th hole in hook rail at position 1
Flywheel end: 2nd hole in hook rail at position 8
  WARNING
Use locking pins -arrows- to secure hooks and locating pins.
  Note
t  The positions marked 1...4 on the bar must be towards the pulley end.
t  The holes in the hooks are counted up from the hook.
–  Secure engine to support clamp -VW 313- using engine and gearbox support -VW 540-.
  N10-0210

Notes on installing > < Notes on removing