volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Bleed the brake caliper in advance > < Plunger for rear brake caliper - remove and install|Remove

Polo Mk4

Install
Install
The plunger and sealing ring surfaces can only be cleaned with alcohol and immediately dried.
–  Apply a light coat of Assembly putty - G 052 150 A2- on the plunger and sealing ring.
   
–  Install the protection cover with the external lip over the plunger.
  N47-0079
–  Install the internal lip in the cylinder groove with the Wedge -3409-.
Keep the plunger in front of the brake caliper case.
  N47-0081
–  Screw the plunger by turning the tool's milled wheel to the right.
–  To install, use the Complementary plate - 3272/1- for help.
t  The automatic brake caliper readjustment is harmed when the plunger is displaced with a replacement device or when the brake pedal is pressed.
–  Install the brake pads.
  N46-0157

Bleed the brake caliper in advance > < Plunger for rear brake caliper - remove and install|Remove