Volkswagen Workshop Service and Repair Manuals > Polo Mk4 > Engine | 4 - Cyl. injection engine | Fuel supply, gas operation | Fuel supply system components - remove and install | Cold start system components - remove and install

Part III

Right front wheel case (petrol reservoir fastening).

1 -

8 Nm

q	When installing the reservoir, the hoses and the Fuel pump for cold start -V263- must be installed.

BPA engine

–	Hose positions in the Cold start valve -N17--1- Aeration hose, -2- Hose for the Throttle valve control unit -J338--3- Hose for the Fuel pump for cold start -V263-.

CCRA engine

–	Positioning of hoses in the Cold start valve -N17-. -1- Breather hose -2-Hose for Cold start fuel pump -V263- for petrol reservoir -3- Hose for Cold start valve -N17- to the intake manifold.

Volkswagen Workshop Service and Repair Manuals