R32 4Motion V6-3.2L (CBRA) (2008)
-
Disconnect electrical connectors - 1 - and - 2 - at right of vehicle floor.
-
Remove connection coupling from bracket and free up wiring to Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) G130 and
Oxygen Sensor (O2S) 2 behind Three Way Catalytic Converter (TWC) G131.
-
Remove front exhaust pipe nuts accessible from bottom from exhaust manifolds -arrows -.
-
Remove the underbody crossmember by removing nuts - 1 - and - 2 -.
NOTE: Do not bend the flex joints in front of the exhaust pipe more than 20 degrees or they may be damaged.
-
Separate exhaust system at clamping sleeve - 3 -.
-
Unscrew bracket for exhaust system - arrows -.
-
Remove the front exhaust pipe with catalytic converter.