volkswagen Workshop Repair Guides

Volkswagen Up! Service and Repair Manuals | Workshop, Auto Repair

ABOUT US
Removing and installing flexible shaft for temperature flap > < Removing and installing fresh air/recirculated air flap actuator

Removing and Installing Flexible Shaft for Air Distribution | HVAC System

Removing and installing flexible shaft for air distribution
Removing and installing flexible shaft for air distribution
Removing
–  Remove glove compartment → General body repairs, interior; Rep. gr.68.
–  Remove control and display unit → Chapter.
Move flexible shaft to following position:
l  Turn rotary knob for air distribution -1- until locking mechanism -arrow B- in flexible shaft -3- is visible in gears -4-.
   
–  Release catch -arrow B- of flexible shaft -3- using a small screwdriver and pull out shaft from gears -4-.
–  Release catch -arrow A- of flexible shaft -3- and remove shaft from control and display unit -2-.
Installing
–  Install in reverse order.
Checking function
Flexible shaft for air distribution flap actuator:
–  Run fresh air blower at highest speed. If air flows out of defroster vent in the „Defrost“ position and no air flows out of footwell vent, then the flexible shaft is correctly installed. Otherwise remove the flexible shaft from the fresh air and heated air controls, turn control knob 1/2 a rotation (180°) and refit the flexible shaft. Repeat check.
  N87-10904

Removing and installing flexible shaft for temperature flap > < Removing and installing fresh air/recirculated air flap actuator