volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 7042 > < Procedures|Page 7040
Page 5
background image

Remove the lifting tools

Rear

Anti-Roll Bar Rear, Replacing 

Special Tools:  951 2050

Raise the car

Remove the left-hand rubber mounting for the muffler

-

Hang up the muffler using a tie strap so that the muffler is as high as possible.

Remove the outer nut (1) on the transverse arm mounting. Remove the screw

Mark up the position of the right-hand transverse arm mounting in relation to the hole (2) in the left-hand trailing arm

-

Make a punch mark in the mounting at the edge of the hole.

-

Remove the other screw from the mounting.

NOTE:  It is very important that markings are correctly made. If not the rear wheel toe-in will be incorrect.

Procedures|Page 7042 > < Procedures|Page 7040