V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Note!
A maximum of 100 mm (A) of the cable can be untwisted at the joint.
Stripping the cables
3
Remove approximately 5 mm of insulation from the ends of the cable. Use cable stripping tool 951 2620. Twist the ends of the cables.
Crimping the splicing sleeve
4
Caution!
Join the cables with matching colors in the splicing sleeve.
Position splicing sleeve P/N 951 2783 in crimping tool 951 2785 in the green opening. Press the splicing sleeve together with the cables inserted.
Pull the cables to ensure that none are loose.
Shrinking the splice sleeve
5
Use hot air gun 9512850 and nozzle 9512779. Set the hot air gun to flow 2 and set the temperature between 2 and 3 (69° C).
