V50 L5-2.4L VIN 39 B5244S7 (2005)
Use VIDA vehicle communication to calibrate the control module
Final check
Ignition on.
Wait five seconds and until the symbol for the brakes on the dashboard has gone out.
In the event of a fault (the symbol is lit).
Check that the connector is connected.
Read off any diagnostic trouble codes (DTCs) stored in the control module.
Erase. Interrupt the diagnostic function by turning off the ignition.
Test drive the car, see: Test Drive Form (ABS), description See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Test Drive Form (ABS).
Check that no diagnostic trouble codes (DTCs) are stored.
Interrupt the diagnostic function by turning off the ignition.