V70R AWD L5-2.3L Turbo VIN 52 B5234T6 (1998)
Brake Rotor/Disc: Testing and Inspection
Measuring Brake Disc Lateral Movement [TTT]
TTT. Measuring brake disc lateral movement
TTTA. Measuring lateral run-out on brake disc
Special tools: 115 8147, 999 5418, 999 5442, 999 5507
[TTTA1]
Preparations
- Get measurement tool set 999 5418, 999 5418.
Front:Remove brake caliper from caliper mounting as per [MMMA1-MMMA4] See: Brake Pad/Service and Repair
Rear:Remove brake caliper from rear axle, see [RRRA4], then continue as below. See: Brake Pad/Service and Repair
[TTTA2]
Installing clamp ring
Hubs with four wheel bolts: Install clamp ring 999 5442 on hub with wheel nuts.
Hubs with five wheel bolts:
- Install clamp ring 999 5419 from measurement tool set 999 5418 on hub with wheel nuts.
- Make sure that contact surfaces on brake disc and clamp ring are clean.
- Tighten bolts hand tight, then tighten across to 110 Nm (80 ft lb). When tightening with airgun, use torque socket 115 8147.
[TTTA3]
Installing test equipment