3.2TL TYPE S V6-3.2L SOHC (2002)
Front Door Panel: Service and Repair
Front Door Panel Removal/Installation
Special Tool Required
Trim pad remover, Snap-on A177A or equivalent, commercially available.
1. Remove the mirror mount cover. Take care not to scratch the door panel.
2. Remove the inner handle (A). Take care not to scratch the door panel.
1. Pry out the cap (B), and remove the screw.
2. Pull the inner handle forward and out half-way.
3. Disconnect the inner handle rod (C), power door lock switch connector (D), and on '02-03 models, driving position memory' switch connector
(E) (driver's).