3.2TL TYPE S V6-3.2L SOHC (2002)
3. Remove the screw from the armrest portion of the door panel. Release the clips that hold the door panel (A) with a commercially available trim
pad remover (B), then remove the door panel by pulling it upward. Remove the door panel with as little bending as possible to avoid creasing or
breaking it.
4. Disconnect the power window switch connectors (A), power mirror switch connector (B) (driver's), security indicator connector (C) (driver's),
driver's door subharness connector (D), and courtesy light bulb socket (passenger's) (E), and detach the harness clips (F) from the passenger's door
panel.
5. Install the panel in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Make sure the connectors and courtesy light bulb socket are plugged in properly, and the rod is connected properly.
-
Check the window and power door lock operation.
