acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Radiator and Condenser Fans Circuit A|Page 3706 > < Radiator and Condenser Fans Circuit A|Page 3704
Page 2
background image

7. Measure the voltage between fan control module 8P connector terminal No. 1 and body ground.

Is there the battery voltage?

YES-Repair an open in the wire between fan control module terminal No. 1 and radiator fan relay 4P socket terminal No. 3.
NO-Go to step 8.

8. Disconnect the fan control module 8P connector.

9. Check for continuity between fan control module 8P connector terminal No. 1 and body ground.

Is there the continuity?

YES-Repair short in the wire between fan control module 8P connector terminal No. 1 and radiator fan relay 4P socket terminal No. 3. A short
on the YEL wire may damage the fan control module. If the symptom is still present after, repairing the short, substitute a known-good fan
control module, and recheck.
NO-Replace the fan control module.

10. Disconnect the radiator fan motor 2P connector.

11. Measure the voltage between fan motor 2P connector terminal No. 2 and body ground.

Is there battery voltage?

YES-Go to step 12.
NO-Repair an open in the wire between radiator fan relay 4P socket terminal No. 2 and radiator 2P connector terminal No. 2.

12. Disconnect the jumper wire.
13. Test the radiator fan motor.

Is the fan motor OK ?

YES-Repair an open in the wire between radiator fan motor 2P connector terminal No. 1 and body ground G204.
NO-Replace the radiator fan motor.

Radiator and Condenser Fans Circuit A|Page 3706 > < Radiator and Condenser Fans Circuit A|Page 3704