acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Radiator and Condenser Fans Circuit A|Page 3710 > < Radiator and Condenser Fans Circuit A|Page 3708
Page 1
background image

Radiator Cooling Fan Motor: Diagnostic Trouble Code Tests and Associated Procedures
Radiator and Condenser Fans High Speed Circuit

Radiator and Condenser Fans High Speed Circuit Troubleshooting

1. Remove the radiator fan relay and condenser fan relay from the under-hood fuse/relay box.
2. Disconnect the radiator fan switch C 2P connector.
3. Turn the ignition switch ON (II).

4. Measure the voltage between radiator fan switch C 2P connector terminal No.1 and body ground.

Is there the battery voltage?

YES-Go to step 5.
NO-Repair an open in the wire between fan control relay 5P socket terminal No.3 and radiator fan switch C terminal No.1

5. Install the radiator fan relay and condenser fan relay.

6. Connect a jumper wire between radiator fan switch C 2P connector terminals No.1 and No.2.
7. Turn the ignition switch ON (II).

Do the radiator and condenser fan run?

YES-Replace radiator fan switch C.
NO-Repair an open in the wire between radiator fan switch C 2P connector terminal No.2 and ground G204.

Radiator and Condenser Fans Circuit A|Page 3710 > < Radiator and Condenser Fans Circuit A|Page 3708