acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Radiator and Condenser Fans Circuit A|Page 3709 > < Radiator and Condenser Fans Circuit A|Page 3707
Page 1
background image

Radiator Cooling Fan Motor: Diagnostic Trouble Code Tests and Associated Procedures
Radiator and Condenser Fans Circuit E

Radiator and Condenser Fans Circuit Troubleshooting E 

1. Remove the condenser fan relay, and test it.

Is the relay OK ?

YES-Go to step 2.
NO-Replace the relay. 

2. Disconnect radiator fan switch C 2P connector and turn the ignition switch ON (II).

Does the radiator fan stop?

YES-Replace radiator fan switch C and recheck.
NO-Go to step 3.

3. Turn the ignition switch OFF.
4. Remove the radiator fan relay from the under-hood fuse/relay box.

5. Check for continuity between radiator fan switch C 2P connector terminal No. 1 and body ground.

Is there continuity?

YES-Repair a short in the wire between radiator fan relay 4P socket terminal No. 4, radiator fan switch C 2P connector terminal No. 1 and A/C
pressure switch.
NO-Go to step 6.

6. Disconnect the radiator fan switch A 2P connector and turn the ignition switch ON (II).

Does the radiator fan stop?

YES-Replace radiator fan switch A.
NO-Repair a short in the wire between radiator fan relay 4P socket terminal No. 4, condenser fan relay 4P socket terminal No. 4. 

Radiator and Condenser Fans Circuit A|Page 3709 > < Radiator and Condenser Fans Circuit A|Page 3707