acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Radiator and Condenser Fans Circuit A|Page 3708 > < Radiator and Condenser Fans Circuit A|Page 3706
Page 1
background image

Radiator Cooling Fan Motor: Diagnostic Trouble Code Tests and Associated Procedures
Radiator and Condenser Fans Circuit D

Radiator and Condenser Fans Circuit Troubleshooting D 

1. Remove the condenser fan relay from the under hood fuse/relay box and test it.

Is the relay OK ?

YES-Go to step 2.
NO-Replace the condenser fan relay.

2. Turn the ignition switch ON (II).

3. Measure the voltage between condenser fan relay 4P socket terminal No. 3 and body ground.

Is there battery voltage?

YES-Check these circuits:
^

The wire between condenser fan relay 4P socket terminal No. 4 and radiator fan switch A terminal No. 2.

^

The connection between condenser fan relay 4P socket terminal No. 1 and fuse No. 58 (30A) in the under-hood fuse/relay box. The wire
between condenser fan relay 4P socket terminal No. 2 and the condenser fan motor. The wire between the condenser fan motor and the fan
control relay.

NO-Go to step 4.

4. Measure the voltage between fan control module 8P connector terminal No. 3 and body ground.

Is there battery voltage?

YES-Repair an open in the wire between fan control module terminal No. 3 and condenser fan relay 4P socket terminal No. 3.
NO-Replace the fan control module.

Radiator and Condenser Fans Circuit A|Page 3708 > < Radiator and Condenser Fans Circuit A|Page 3706