acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

SRS Indicator Stays On After the Ignition Switch is Turned ON|Page 10539 > < SRS Indicator Stays On After the Ignition Switch is Turned ON
Page 2
background image

9. Disconnect the front passenger's airbag 4P connector.

10. Disconnect both seat belt tensioner 2P connectors.

11. Disconnect SRS unit connector B (18P) from the SRS unit.
12. Reconnect the negative battery cable.
13. Turn the ignition switch ON (II) and wait for 30 seconds. Then turn the ignition switch OFF.
14. Check the No. 2 (10 A) fuse in the driver's under-dash fuse/relay box.

Is the fuse OK?

YES - Short to ground in the SRS unit; replace the SRS unit.

NO - Go to step 15.

15. Replace the No. 2 (10 A) fuse in the driver's under-dash fuse/relay box.

SRS Indicator Stays On After the Ignition Switch is Turned ON|Page 10539 > < SRS Indicator Stays On After the Ignition Switch is Turned ON